Protective housing indoor/outdoor

Energie Block TEB

The EnergieBlock TEB transformer enclosure is a system for cast resin transformers for outdoor and indoor use. Transformers with a power rating of up to 1600 kVA and a rated voltage of up to 24 kV can be installed in this enclosure. The enclosure meets the requirements for AN and AF operation and can be equipped with a roof-mounted and cross-flow fan for AF operation. The EnergieBlock TEB can be combined with either the BasisBlock or VarioBlock systems.

Technical data
Standards and regulations IEC 61439
Rated voltage max. 24 kV/690 V
Rated current max. 630/2800 A
Rated short-time withstand current max. 20/100 kA
Rated surge current max. 50/220 kA
Rated short-circuit duration 1s
Arc fault test with upstream HRC fuse
Arc test according to DIN EN 60298 (VDE0670 part 601) and Pehla Guideline No. 4

Energie Block TEB-S

The EnergieBlock TEB-S transformer enclosure is a system for cast resin transformers for outdoor and indoor use. Transformers with a power rating of up to 2000 kVA and a rated voltage of up to 24 kV can be installed in this enclosure. The enclosure meets the requirements for AN and AF operation and can be equipped with a roof-mounted and cross-flow fan for AF operation. The EnergieBlock TEB can be combined with either the BasisBlock or VarioBlock systems.

The transformer enclosure is tested in accordance with IEC 62271-200 and IEC 61439. Customer-specific requirements can be covered up to 2500 kVA and 36 kV, as well as a fault arc test up to 20 kA/1S.

Technical data
Standards and regulations IEC 62271-200 / 61439
Rated voltage max. 24 kV/690 V
Rated current max. 630/3200 A
Rated short-time withstand current max. 31,5/110 kA
Rated surge current max. 80/242 kA
Rated short-circuit duration 1s
Accessibility type A Typ A
Arc fault test according to IEC 62271-200 / 61439
Medium voltage
Unaffected short-circuit alternating max. 31,5 kA
Short-circuit duration max. 1s
Low voltage
Unaffected short-circuit alternating max. 110 kA
Short-circuit duration max. 300ms

Star point housing (outdoor housing)

The star point enclosure belongs to the Energy Blocks product family. This enclosure is installed outdoors (in the open air) and is used to house transformers and implement medium-voltage star point treatment.

Depending on the design of the neutral point treatment, the enclosure can accommodate circuit breakers, disconnectors, earthing switches, neutral point formers and resistors.

The enclosure for outdoor installation complies with the guidelines of DIN 18195 (building waterproofing) and the standards IEC 62271-1, IEC 62271-200 and IEEE STd 32-1972 and is subject to arc flash testing in accordance with IEC 62271-200 up to 31.5 kA / 1 s.